Chauvet Beamer 8 Скачать руководство пользователя страница 3

Beamer 8 User Manual Rev. 1 

Page 3 of 17 

1. B

EFORE 

Y

OU 

B

EGIN

What Is 

Included

 

Beamer 8

Power Cord

Warranty Card

Quick Reference Guide

Unpacking 

Instructions

 

Carefully unpack the product immediately and check the container to make sure all the 
parts are in the package and are in good condition. 

Claims 

If the box or the contents (the product and included accessories) appear damaged from
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. 
Failure to report damage to the carrier immediately may invalidate your claim. In 
addition, keep the box and contents for inspection. 
For other issues, such as missing components or parts, damage not related to shipping, 
or concealed damage, file a claim with Chauvet within 7 days of delivery. 

Text 

Conventions

Convention 

Meaning 

1—512 

A range of values 

50/60 

A set of values of which only one can be chosen 

Settings 

A menu option not to be modified 

Menu > Settings 

A sequence of menu options to be followed 

<ENTER> 

A key to be pressed on the product’s control panel 

ON 

A value to be entered or selected 

Symbols 

Symbol 

Meaning 

Electrical warning. Not following these instructions may cause 
electrical damage to the product, accessories, or the user. 

Critical installation, configuration, or operation information. Not 
following these instructions may make the product not work, cause 
damage to the product, or cause harm to the operator. 

Important installation or configuration information. The product 
may not function correctly if this information is not used. 

Useful information. 

Disclaimer

 

Chauvet believes that the information contained in this manual is accurate in all
respects. However, Chauvet assumes no responsibility and specifically disclaims any 
and all liability to any party for any loss, damage or disruption caused by any errors or 
omissions in this document, whether such errors or omissions result from negligence, 
accident or any other cause. Chauvet reserves the right to revise the content of this 
document without any obligation to notify any person or company of such revision, 
however, Chauvet has no obligation to make, and does not commit to make, any such 
revisions. Download the latest version from 

www.chauvetlighting.com

The works of authorship contained in this manual, including, but not limited to, all design, 
text and images are owned by Chauvet. 

© Copyright 2016 Chauvet & Sons, Inc. All rights reserved. 

Electronically published by Chauvet in the United States of America. 
CHAUVET,  the  Chauvet  logo  and  Beamer 8  are  registered  trademarks  or  trademarks 
of Chauvet & Sons 

LLC

. (d/b/a Chauvet and Chauvet Lighting) in the United States 

and  other  countries.  Other  company  and  product  names  and  logos  referred  to  herein 
may be trademarks of their respective companies. 

Содержание Beamer 8


















Отзывы: