Chauvet BEAMbar, Руководство пользователя

Страница: 11 / 18

BEAMbar™ User Manual (Rev. 1) Page 11 of 18
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The BEAMbar™ uses up to 5 DMX channels in its 5-channel DMX mode, which defines
the highest configurable address to
508 .
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com .
To select the starting address, do the following:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Press <ENTER> and 1 – 509 shows on the display.
Note: The highest starting address that shows on the display is determined by
the DMX personality that is currently selected.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER> .
DMX
Personalities
The BEAMbar™ has two DMX personalities. One is a 4-channel personality and the other
is a 5-channel personality.
To select either DMX personality, do the following:
1. Press <MENU> repeatedly until ChMd shows on the display.
2. Press <ENTER> and 4Ch or 5Ch shows on the display.
3. Use <UP> or <DOWN> to select either 4Ch (4-channel mode) or 5Ch (5-channel
mode).
4. Press <ENTER> .