EN
2
AmHaze ECO QRG Rev. 2
QUICK REFERENCE GUIDE
AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC,
50 Hz, depending on the specific model purchased.
AC Plug
Resetting the Breaker
This product is equipped with a resettable circuit breaker. If the breaker trips, all sections of this product will lose power.
1.
Remove the power cord from mains power.
2.
Allow unit to cool for 15 minutes.
3.
After 15 minutes, you may attempt to reset the breaker by pressing the button with your finger.
4.
Plug the product’s power cord into the power outlet and continue using as recommended.
DMX Linking
The AmHaze ECO will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is available
DMX Connection
The AmHaze ECO uses a 3- or 5-pin DMX data connection for its 3 DMX personalities. See the User Manual for
information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The AmHaze ECO supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
for more details.
Mounting
Before mounting this product, read the
. Use at least one mounting point per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
!
Mounting Clamp
Overhead Mounting
Floor Mounting
Safety Cable