Chauvet 6 spot quad IRC, Руководство пользователя

Страница: 15 / 21

6SPOT™ Quad IRC User Manual Rev. 1 Page 15 of 21
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
•
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Static Color Mode
To run the 6SPOT™ Quad IRC in static-color mode, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> and C 1–C15 will show on the display.
3. Use <UP> or <DOWN> to select the desired color.
4. Press <ENTER> .
Auto Program
Mode
To run the 6SPOT™ Quad IRC in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P 1–P10 will show on the display.
3. Use <UP> or <DOWN> to select the desired program.
4. Press <ENTER> .
Program Speed
To adjust the auto program speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <UP> or <DOWN> and S 1–S100 will show on the display.
3. Use <UP> or <DOWN> to increase or decrease the program speed.
4. Press <ENTER> at the desired speed to set it and return to Auto Program mode.
Sound-Active
Mode
To run the 6SPOT™ Quad IRC in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> .
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity To adjust the sound sensitivity, follow the instructions below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Press <UP> or <DOWN> and u 1–u100 will show on the display.
3. Use <UP> or <DOWN> to increase or decrease the sound sensitivity.
4. Press <ENTER> when the product responds to the beat of the music to set the
sensitivity and return to Sound-Active mode.
Custom Color
Mixing Mode
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
•
rxxx (red, 0-255)
•
gxxx (green, 0-255)
•
bxxx (blue, 0-255)
•
wxxx (white, 0-255)
3. Press <ENTER> to cycle through the color settings
4. Use <UP> or <DOWN> to increase or decrease the selected color value.
NOTE: Selecting 0 will turn the color off.
5. Repeat steps 3 and 4 until you have your desired color.