COLORado™ 1-Quad Zoom Tour QRG
EN
3
What Is
Included
•
COLORado™ 1-Quad Zoom Tour
•
Neutrik® powerCON® Power Cord
•
Gel Frame
•
Safety Cable
•
Gel Frame Holder
(7.5 in/191 mm accessories)
•
Warranty Card
•
Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 12 COLORado™ 1-Quad Zoom Tour products at 120 V,
21 products at 208 V, or 23 products at 230 V. Never exceed this number. Power
linking cords can be purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
DMX Linking
The COLORado™ 1-Quad Zoom Tour will work with a DMX controller using a
3- or 5-pin DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com
.
DMX Connection
The COLORado™ 1-Quad Zoom Tour uses a 3- or 5-pin DMX data connection for
its DMX personalities:
TOUR
,
TR16
,
FULL
,
ARC.1
,
AR1.D
,
ARC.2
,
AR2.D
,
C1Q
,
STD.Y
,
AR2.S
,
AR2.Z
, and
HSV
. See the User Manual for information
about connecting and configuring the product for DMX operation.
•
The C1Q personality has been designed to be used to match the
Colorado™ 1-Quad series. In this personality, the zoom is locked to
match the beam and field angles of the Colorado™ 1-Quad series.
•
For optimum control of the 16-bit dimming channels in the TR16 and
STD.Y personalities, be sure that both dimming curves in SET > DIM and
SET > CURV are set to OFF.
Master/Slave
Connection
The COLORado™ 1-Quad Zoom Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual for information about connect and
configure the product for master/slave operation.