manualshive.com logo in svg

Chauvet Professional VIP DRIVE 10-5 Nova, Руководство пользователя, Страница: 37 / 57

Поделиться
Скачать
Chauvet Professional VIP DRIVE 10-5 Nova Скачать руководство пользователя страница 37

Page 33 of 53

VIP Drive 10-5 Nova User Manual Rev. 1

Operation

Preset Settings

The VIP Drive 10-5 Nova can record the current settings configuration as 1 of 10 Presets, and load that 

configuration at will. To access the Preset Settings:

1. Press the 

<MENU>

 knob to access the menu.

2. Turn the 

<MENU>

 knob until 

Preset Settings 

is selected.

3. Press the 

<MENU>

 knob.

Save Preset

To save the current configuration of settings to a Preset slot:

1. Access the 

Preset Settings

.

2. Turn the 

<MENU>

 knob to select the desired slot, from 

Preset 1–10

.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select 

Save

.

5. Press the 

<MENU>

 knob.

6. If a settings configuration has already been saved to that slot, the message 

Overwrite Preset _?

 

will be displayed. Turn the 

<MENU>

 knob to select 

No

 or 

Yes

.

7. Press the 

<MENU>

 knob.

Load Preset

To load the settings configuration of a saved Preset:

1. Access the 

Preset Settings

.

2. Turn the 

<MENU>

 knob to select the desired 

Saved

 slot, from 

Preset 1–10

.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select 

Load

.

5. Press the 

<MENU>

 knob.

Clear Preset

To clear a Preset slot, deleting all saved configuration data:

1. Access the 

Preset Settings

.

2. Turn the 

<MENU>

 knob to select the desired 

Saved

 slot, from 

Preset 1–10

.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select 

Clear

.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to select 

No

 or 

Yes

.

7. Press the 

<MENU>

 knob.

Copy Preset

To copy a Saved Preset to a Blank Preset slot:

1. Access the 

Preset Settings

.

2. Turn the 

<MENU>

 knob to select the desired 

Saved

 slot, from 

Preset 1–10

.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select 

Copy To

.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to select the desired Preset slot, from 

Preset 1–10

.

7. Press the 

<MENU>

 knob.

8. If a settings configuration has already been saved to that slot, the message 

Overwrite Preset _?

 

will be displayed. Turn the 

<MENU>

 knob to select 

No

 or 

Yes

.

9. Press the 

<MENU>

 knob.

•

Preset slots with no data saved are marked Blank.

•

Preset slots with saved configuration data are marked Saved.

•

The currently loaded Preset slot is marked Used.

Содержание VIP DRIVE 10-5 Nova


























































Отзывы:

Нет отзывов