Chauvet Professional ROGUEOUTCAST2HYBRID, Руководство пользователя

Страница: 22 / 29

Page 18 of 25
Operation
Rogue Outcast 2 Hybrid User Manual Rev. 1
Off Via DMX
To enable the ability to turn the lamp off with a DMX controller:
1. Access the Lamp Settings .
2. Select the Off Via DMX option.
3. Select from NO (DMX may not turn lamp off), or YES (DMX may turn lamp off).
On If DMX On
To set the lamp to turn on when a DMX signal is detected:
1. Access the Lamp Settings .
2. Select the On If DMX On option.
3. Select from NO (detecting a DMX signal will not turn on the lamp), or YES (detecting a DMX signal
will turn on the lamp).
Off If DMX Off
To set the lamp to turn off when a DMX signal is not detected:
1. Access the Lamp Settings .
2. Select the Off If DMX Off option.
3. Select from NO (detecting no DMX signal will not turn off the lamp), or YES (detecting no DMX
signal will turn off the lamp).
Ignition Delay
To set the time in seconds between the product powering on and the lamp turning on (when State/Power
On is set to ON ):
1. Access the Lamp Settings .
2. Select the Ignition Delay option.
3. Set the delay time from 0–255 (seconds).
Low Power Delay
To set the time in seconds before the lamp enters low power mode with the shutter closed:
1. Access the Lamp Settings .
2. Select the Low Power Delay option.
3. Set the delay time from 0–255 (seconds).
Reset Lamp On Time
To reset the Lamp On Time counter (see the System Information ):
1. Access the Lamp Settings .
2. Select the Reset Lamp Time option.
3. Select from NO (will not reset counter), or YES (resets counter).
Maintenance Timer Interval
To set the interval of the maintenance timer (how long before the product signals it needs maintenance):
1. Go to the Setup main level.
2. Select the Maintenance Timer option.
3. Select the Interval option.
4. Set the interval time from 010–250 (hours).
Reset Maintenance Timer
To reset the maintenance timer:
1. Go to the Setup main level.
2. Select the Maintenance Timer option.
3. Select the Remain Time option. The time remaining will display (it is also visible in the System
Information ).
4. Select from RESET (will reset the timer), or NO (will not reset the timer).
Display Backlight Timer
To set how long before an inactive display will turn off:
1. Go to the Setup main level.
2. Select the Backlight Timer option.
3. Select the length of the backlight timer, from 30S (30 seconds), 1M (1 minute), 5M (5 minutes), or
ON (always on).