Chauvet Professional MAVERICK STOM 2 PROFILE, Руководство пользователя

Страница: 24 / 31

20
Operation
Maverick Storm 2 Profile User Manual Rev. 1
Fan Mode
To set the fan speed mode:
1. Go to the Settings main level.
2. Select the Fans option.
3. Select the fan mode, from Auto (fan speed adjusts to product temperature), Full (fan speed at
maximum), ECO (quiet mode), TV25 (maintains LED output up to an ambient temperature of 77 °F
[25 °C]), or TV35 (maintains LED output up to an ambient temperature of 95 °F [35 °C]).
Dimmer Curve
To set the dimmer curve:
1. Go to the Settings main level.
2. Select the Dimmer Curve option.
3. Select the dimmer curve, from Linear , Square , I Squa , SCurve , or Linear2 .
Pulse Width Modulation
To adjust the frequency of the pulse width modulation:
1. Go to the Settings main level.
2. Select the PWM Option option.
3. Select the frequency, from 600Hz , 1200Hz , 4000Hz , 6000Hz , or 15000Hz .
LED Power
To set the power of each LED color:
1. Go to the Settings main level.
2. Select the LED POWER option.
3. Set the LED power from 64–255 .
Minimum Zoom Focus
To enable or disable the Min Zoom Focus function:
1. Go to the Settings main level.
2. Select the Min Zoom Focus option.
3. Select NO (manual independent zoom control) or YES (focus adjusts depending on zoom setting).
Preset Selection
To select a preset configuration of menu options:
1. Go to the Settings main level.
2. Select the Preset Select option.
3. Select from PRESET A (default), PRESET B , or PRESET C .
Preset Synchronization
To transfer saved Presets from one Maverick Storm 2 Profile to another:
1. Connect the Maverick Storm 2 Profile products to receive the Presets by a DMX daisy chain.
2. Make the Maverick Storm 2 Profile with the Presets to transfer the first in the DMX daisy chain.
3. Power on all of the products.
4. Set all of the products to a
Control Mode other than WDMX . ( DMX , ArtNet , or sACN )
5. On the Maverick Storm 2 Profile with the Presets, go to the Settings main level.
6. Select the Preset Sync option.
7. Select NO (to cancel) or YES (to transfer the Presets to the connected products).
When using the TV25 or TV35 fan mode, please set the PWM Options ( Pulse Width
Modulation ) to 6000Hz or 15000Hz to prevent any harmonization noise.
• Changes to settings automatically save to the currently selected Preset.
• If no Preset has been selected, changes to settings save to PRESET A.
• After selecting a Preset, the product will restart.
• All menu configurations are transferred except for the IP address.
• ONLY connect Maverick Storm 2 Profile products for this function!