5
EN
QUICK REFERENCE GUIDE
Color STRIKE M QRG Rev. 5
USB Software Update
The Color STRIKE M allows for software updates with a USB device using the built-in USB port. To update the software
using a USB flash drive, do the following:
1. Power on the fixture, and plug the flash drive into the USB port.
Master/Slave
Master
DMX mode (master)
Slave
Slave mode
Dimmer Mode
OFF
Linear dimmer
DIM1–3
Dimming curves:
Dimmer 1
(fast) to
Dimmer 3
(slow)
White Balance
Off
Turns white balance off
Manual
Red
Combines red, green, and blue to create
custom color
Green
125–255
Blue
LED Frequency
600Hz
Sets the Pulse Width Modulation (PWM)
frequency
1200Hz
2000Hz
4000Hz
6000Hz
25000Hz
Fan Mode
Auto
Sets fan to auto — fan speed adjusts
according to product temperature
On
Turns fan on
Backlight
10s
Turns off display backlight after
10 seconds of inactivity
30s
Turns off display backlight after
30 seconds of inactivity
2Min
Turns off display backlight after
2 minutes of inactivity
Always On
Display backlight remains on
Key Lock
On
Turns passcode on or off (Password is
<
UP
>, <
DOWN
>, <
UP
>, <
DOWN
>,
<
ENTER
>)
Off
Ethernet Setting
Universe
0–255 (ArtNet)
Sets the universe
1–255 (sACN)
IP Address
2.192.0.1
Sets the IP address
Information
Fixture Hours
_ _ _Hours
Displays total hours the product has
been powered on
Version
V_ _
Displays firmware version
UID
_ _ _ _ _ _ _ _ _ _ _ _ _ _
Displays product UID
Upgrade Firmware
Only This Fixture
_ _ _ _ _ _.CHL
...
Selects an update file for this product, or
shows “
No such file!
”
Multiple Fixtures
_ _ _ _ _ _.CHL
...
Selects an update file for this and
connected Color STRIKE M products, or
shows “
No such file!
”
Other Fixture Type
_ _ _ _ _ _.CHL
...
Selects an update file for other
connected products, or shows “
No such
file!
”
Factory Reset
No
Resets settings to factory default
Yes
Main Level
Programming Levels
Description