Chauvet Professional 080111732, Руководство пользователя

Страница: 24 / 33

Page 22 of 31
Operation
Rogue R3 Beam User Manual Rev. 5
Address
This programming level sets the DMX starting address. In this mode, each product will respond to a unique
starting address from the DMX controller. All products with the same starting address will respond in
unison. This option sets the products DMX address.
1. Starting from the Main Level screen, select Address, press <ENTER>.
2. Select the starting address (001–512) , press <ENTER>.
Run Mode
This programming level sets the DMX personality and controls the different test modes.
• Starting from the Main Level screen, select Running Mode, press <ENTER> .
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Highlight DMX , press <ENTER> .
2. Select the DMX personality 16 or 19 press <ENTER> .
Auto Test
This option runs every attribute individually through 1 cycle.
• Highlight Auto Test , press <ENTER> .
14 Frost 000  255 0–100%
15 Focus 000  255 0–100%
16 Control
000  069 No function
070  079 Enable pan/tilt blackout
080  089 Disable pan/tilt blackout
090  099 Enable blackout while color wheel is moving
100  109 Disable color wheel blackout
110  119 Enable blackout while gobo wheels are moving
120

129 Disable gobo wheel blackout
130  139 Lamp on
140  149 Pan/tilt reset
150  159 Color wheel reset
160  169 Gobo wheel reset
170  179 Shutter/prism reset
180  189 No function
190  199 Focus reset
200  209 All reset
210  219 Enable blackout all function during pan/tilt
220  229 Disable blackout all function during pan/tilt
230  239 Lamp off
240

255 No function
Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
The Auto Test will end after 1 full cycle. You can stop the test by pressing
<MENU> at any time.
Channel Function Value Percent/Setting