Page 2 of 8
Before You Begin
XPRESS-512S / XPRESS-1024 User Manual Rev. 1
Safety Notes
•
This product is not intended for permanent installation.
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
•
Make sure the power (USB) cord is not crimped or damaged.
•
Never disconnect the product from power by pulling or tugging on the cord.
•
Make sure there are no flammable materials close to the product when operating.
•
Do not touch the product’s housing when operating because it may be very hot.
•
The voltage of the outlet to which you are connecting this product must be within the range
stated on the decal or rear panel of the product.
•
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
•
Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•
Be sure that no ventilation slots on the product’s housing are blocked.
•
Never connect the product to a dimmer or rheostat.
•
Never carry the product from the power cord.
•
The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
•
In the event of a serious operating problem, stop using the product immediately.
•
Do not open this product. It contains no user-serviceable parts.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If the product is sold to someone else, be sure that they
also receive this document.
Содержание XPRESS-1024
Страница 1: ...User Manual ...
