Chauvet DJ Mini Kinta ILS, Краткое руководство пользователя

Страница: 4 / 28

3
EN
QUICK REFERENCE GUIDE
Mini Kinta ILS QRG Rev. 2
Menu Map
Refer to the Mini Kinta ILS product page on www.chauvetdj.com for the latest menu map.
DMX Linking
The Mini Kinta ILS can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com .
Starting Address
To ensure full access to all channels available in DMX mode, the highest available DMX address is 509 .
Master/Slave Connection
The Mini Kinta ILS uses the DMX data connection and ILS for its Master/Slave mode. Information about configuring the
Mini Kinta ILS for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The Mini Kinta ILS can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the Mini Kinta ILS User Manual from www.chauvetdj.com .
D-Fi USB Connectivity
The Mini Kinta ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET
DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the User Manual.
Mode Programming Levels Description
DMX Addr A001–509 Sets DMX starting address
Slave SLnd SL-1 Sets slave mode
ILS iLS iLS1–4 Sets ILS mode
Program Auto Aut
FAdE
Automatic program with sound-active function
SnAP
Static CoLo
r000–255
Adjust individual colors (red, green, blue, white)
G000–255
b000–255
U000–255
Str1
Strobe at 3 preset speeds (slow to fast) Str2
Str3
Display
Timeout
LEd
on Display turns off after inactivity
oFF Display stays on
Display
Orientation
diSP
diSP Normal display
diSP
Inverted display
Firmware vEr u_ _ _ Shows current firmware version
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons