4
Neo Clinical Therapy System Cart Manual
CART SPECIFICATIONS
Width
Depth
Height
Weight
Head @ 45 degree with Base (Tabletop)
15.89” (40.3606 cm)
15.89” (40.3606 cm)
22.05” (56.007 cm)
20.7lb (9.389362 kg)
Cart Lowered (with casters)
23.94” (60.8076 cm)
26.19” (66.5226 cm)
27.41” (69.6214 cm)
29.4lb (13.33562 kg)
Cart Raised (with casters)
23.94” (60.8076 cm)
26.19” (66.5226 cm)
30.15” (76.581 cm)
Head and raised cart with screen @ 90deg
23.94” (60.8076 cm)
26.19” (66.5226 cm)
52.85” (134.239 cm)
48.9
lb (22.18067 kg)
NEO LEG TO CART ASSEMBLY/ADJUSTMENT
The Neo Cart is shipped without the legs attached. To
install or adjust the leg assemblies onto the Neo Cart,
follow these steps:
Neo Leg to Cart assembly/Adjustment
Tools Required:
• 3/16” Allen Wrench (provided)
• Flat Washer ¼” Internal diameter, quantity 6,
(provided)
• Allen Bolts ¼-20 x 1-1/4”, quantity 6 (provided)
1. Remove the bottom drawer from the Cart. Pull the
drawer open. Press the plastic tabs on both drawer
slides simultaneously in opposite directions, as shown.
Completely pull the drawer out.
2. There are two Cart height adjustments. Standard
shown on the left and lowered, shown on the right.
For initial installation, determine the desired height.
3. Locate three Allen Bolts and washers for each leg,
left and right sides. Insert the bolts, by hand, in their
respective slots. Use the Allen wrench to secure the
legs.
NOTE: To Adjust Height at a later time, simply remove
the Allen Bolts, reposition the legs and insert the bolts.
4. Reinstall the Bottom Drawer.
