RSR-000886-000 (1)
Page
8
of
40
Caution:
Do not force the external power supply cord into the DC input in the incorrect
orientation (e.g., upside down). This will damage the pins and the unit will not charge
properly.
Step 5.
Plug the AC power cord into the power supply.
Step 6.
Once the power connection is secure, plug the AC power cord into a 100-240
V grounded outlet. A green light on the power supply should illuminate
(signaling active source power connection). If the laser system is off, the battery
will charge provided the laser system is correctly plugged into the power supply
and the wall outlet. The charging time is approximately 3 hours.
2.3. Battery Use and Charging
Warning:
Do not modify the battery or attempt to insert foreign objects into it.
Warning:
Do not short circuit the battery, keep away from metallic items.
Warning:
Do not immerse the battery in water or get the battery wet.
Recommendation:
Charge the battery before use. The laser system ships with the
battery only partially charged.
Note:
When the external power supply is connected to the laser system, the battery icon
will blink green to indicate it is charging the battery. To determine the battery charge
level, the power supply must be unplugged from the rear of the device.
