Intelect® Transport 2-Channel Electrotherapy
52
MAINTENANCE
Cleaning the Unit and the Accessories
With the unit disconnected from the power source, clean the
unit with a clean, lint free cloth moistened with water and mild
antibacterial soap. If a more sterile cleaning is needed, use a cloth
moistened with an antimicrobial cleaner.
Do not submerse the unit in liquids. Should the unit accidentally
become submersed, contact the dealer or Chattanooga Group
Service Department immediately. Do not attempt to use a unit
that has been wet inside until inspected and tested by a Service
Technician Certified by Chattanooga Group.
To clean the Lead Wires, disconnect them from the unit and wipe
them down with a clean, lint free cloth moistened with water and
mild antibacterial soap.
To clean the reusable carbon electrodes, remove them from the
Lead Wires and wipe them down with isopropyl alcohol. Repeat this
procedure for the sponges as well.
MAINTAINING THE UNIT
FACTORY SERVICE
When the Intelect Transport 2-Channel Electrotherapy unit requires
factory service, contact the selling dealer or Chattanooga Group
Service Department.
WARRANTY REPAIR/OUT OF WARRANTY REPAIR
All units returned to the factory for service must include the following:
1.
Written statement containing the following information:
• RA (Return Authorization) Number- Obtain from Factory
•
Model Number
•
Serial Number
•
Contact Person with Phone and Fax Numbers
•
Billing Address (for Out of Warranty Repair)
•
Shipping Address (Where to Ship Unit after Repair)
•
Detailed Description of Problem or Symptoms
2.
Copy of original invoice issued at purchase.
3.
Ship the unit to address specified by an authorized service
technician.
Service to these units should be performed only by Service
Technicians certified by Chattanooga Group.
