6
6
USING THE BELT SYSTEM
ATTACHING THE PELVIC BELT - SUPINE POSITION
1 . Place the belts on the table so that the
blue side faces up, the Pelvic Belt
overlaps the Thoracic Belt, and the
black Table Hook is firmly seated to the
head of the table .
2 . Position the patient so the patient’s
waist is in the middle of the Pelvic Belt .
3 . Firmly wrap the first flap of the Pelvic
Belt across the patient’s waist, staying
level with the patient’s waistline .
4 . While maintaining tension on the first
flap, wrap the second flap over the first
flap, staying level with the patient’s
waistline .
NOTE:
The flaps should be
exerting firm pressure
around the patient’s waist .
5 . Loop the end of the Circumferential
Belt through both Large O Rings and
thread back into one of the Large O
Rings and tighten .
6 . Pull the slack out of the Circumferential
Belt, making sure that the fit is snug .
