Chassis Plans ATXP-965Q, Техническое описание

Страница: 49 / 80

ATXP-965Q Technical Reference Chapter 3 – AMIBIOS Setup
Chassis Plans 41
Hit ‘DEL’ Message Display
Disabled This prevents the CMOS set-up to display
Hit Del to enter Setup during memory initialization. If Quiet Boot is enabled, the
Hit ‘DEL’ message will not display.
Enabled This allows the CMOS set-up to display
Hit Del to enter Setup during memory initialization
►
Boot Device Priority
Set the boot device options to determine the sequence in which the computer checks which device
to boot from. The settings are Removable Dev., Hard Drive, or ATAPI CDROM. The Optimal and
Fail-Safe settings are:
1st boot device Removable Device
2nd boot device CD/DVD
3rd boot device HDD
To change the boot order, select a boot category type such as Hard disk drives, Removable media,
or ATAPI CD ROM devices from the boot menu. For example, if the 1st boot device is set to Hard
disk drives, then BIOS will try to boot to hard disk drives first.
Note: When you select a boot category from the boot menu, a list of devices in that category
appears. For example, if the system has three hard disk drives connected, then the list will show all
three hard disk drives attached.
►
Hard Disk Drives
Use this screen to select the primary hard drive in the system.
►
Removable Drives
Use this screen to select the primary removable drives attached to the system.
►
CD/DVD Drives
Use this screen to select the primary ATAPI CD-ROM drives in the system.
►
BIOS Boot Configuration Options
Select BIOS Boot Look & Feel
BBS AMI Enhanced BBS
AUTOFLEX BBS without the redundant extra menu when only one drive of a type is present
FLEXBOOT AMI Enhanced single-menu Look & Feel