Chase CONCRETE FINISH, Руководство по установке

Страница: 7 / 52

5
The Chase EPS panel, screwed through breathable
builders paper to the external wall framing, is
finished on-site with the Chase render system. This
incorporates Chase fibreglass mesh embedded into
an initial base coat of Chase EPS render, followed by
a second base coat layer and finished with Chase
tintable texture.
Optional :
• Chase primer (tintable) – The primer assists in
adhesion of the texture coat;
• Chase membrane (tintable) – The membrane
will assist in prolonging the life of the system
(particularly texture) as a whole.
Chase EPS panel is lightweight making for easy
handling and installation while also providing a
continuous thermal barrier to the heat and cold.
The Chase EPS External Wall Cladding System provides
the appearance of a rendered masonry wall without
the increased site preparation, cost and time of high-
mass construction. It is designed to be installed on
parapets and bulkheads which allows the designer
the freedom to achieve various finishes on the same
façade.
External wall cladding system selection and design
for any building, must be made by a person who
understands all the relevant local and national building
requirements, the technical aspects of the product and
its proper use.
Product installation must be carried out by a
tradesman under the direction of a Registered Builder
who both understand the technical information and
method of installation of the system.
Figure 1: Chase EPS External Wall Cladding System
System Summary
Chase EPS External Wall Cladding System consists of M Grade expanded polystyrene directly screwed or
installed via a cavity system, to either steel or timber wall framing through breathable wall wrap.
The system is very versatile due to the capability of both direct fix or a cavity system and is designed to be used
in residential construction. Examples of applications include external walls, parapets, bulkheads, fences and
columns.