Charnwood W813, Руководство оператора

Страница: 10 / 16

Recommended Turning Speeds
Diameter (mm)
Roughing RPM General Cutting RPM Finishing RPM
Under 50 1500 3200 3200
50
– 100
750 1600 2500
100
– 150
500 1000 1700
150
– 200
500 800 1250
200 -250 500 650 1000
250
– 300
500 530 850
300 - 350 500 500 700
350 - 400 500 500 600
Maintenance
Changing the Drive Belt
Over time the drive belt will become worn and
will need replacing.
Stop the lathe in the fastest speed and
unplug it from the electric supply. Use a hex
key to undo the grub screw which holds the
silver rotating hand wheel onto the spindle.
Unscrew the rotating hand wheel from the
spindle. Locate the 4 retaining screws and
remove the belt cover. Remove the drive belt
from the motor pulleys first.
Install the new belt and then follow these
instructions in reverse.
You can find a video guide in the technical help section of our website or on youtube.