Charnwood W721, Руководство по эксплуатации

Страница: 3 / 17

- 2 -
Table of contents
1. Components and parts
(standard delivery)………. ......….1
2. Please read first! ..…..............….2
3. Safety
...................................……2
3.1 Specified conditions of use ....……2
3.2 General safety information ....…….2
3.3 Symbols on the Machine………….3
3.4 Safety devices........................…....4
4. Transport...........….………………4
5. Machine
Details...........……….…4
6. Initial operation ..............….…...5
6.1 Mounting ........................….....…..5
6.2 Installing the Saw Table...….….....5
6.3 Aligning the Saw Table......….…...6
6.4 Installing the Fence Guide
Extrusion…………………………..6
6.5 Installing the Rip Fence…………..6
6.6 Installing the Push Stick Holder…6
6.7 Connection of a Dust Collector…..6
6.8 Tensioning the Band Saw Blade…6
6.9 Connection to Power Mains………7
6.10 Assembly the cabinet stand……….7
7. Operation .....................….......…..7
7.1 Sawing ................................…...…8
8. Care and Maintenance ........…….9
8.1 Changing the Band Saw Blade…..9
8.2 Aligning the Band Saw Blade.….....9
8.3 Aligning the Upper Blade Guide.....9
8.4 Aligning the Lower Blade Guide....10
8.5 Replacing the Band Saw Tyre......10
8.6 Replacing the Table Insert
…..
…..10
8.7 Cleaning the Saw................…......10
8.8 Storage ............…………......…....10
9. Repairs ...............................…....10
10. Environmental protection.….….10
11. Troubleshooting Guide........…..11
12. Technical specifications...…….11
13. Electric wiring diagram…………13
14. Exploded view and part list……14
2. Please read first!
These operating instructions have been
written to make it easier for you, the user,
to learn how to operate this machine and
to do so safely. These instructions should
be used as follows:
•
Read these instructions before use.
Pay special attention to the safety
information.
•
These operating instructions are
intended for people with basic
technical knowledge regarding the
operation of a machine like this or
similar electrical power tools.
Inexperiencend persons are strongly
advised to seek competent advise
and guidance from an experienced
person before operating this
machine.
•
Keep all documents supplied with
this machine for future reference.
Retain your proof of purchase in
case of a future warranty claim.
•
This machine must not be sold or
lent to someone else without being
accompanied by all machine
documents supplied with it.
•
The manufacturer assumes no
liability for any damage caused by
neglect of these operating
instructions.
Information in these instructions is
marked as under:
Danger!
Risk of personal injury or
environmental
damage.
Risk of electric shock!
Risk of personal injury
by electric shock.
Entanglement hazard!
Risk of personal injury
by body parts or clothing
being drawn into the
rotating saw blade.
Caution!
Risk of material damage.
Note:
Additional information.
3. Safety
3.1 Specified conditions of use
The machine is suitable for cutting wood,
wood-derived materials and plastics.
Do not cut round stock transverse to its
longitudinal axis without suitable jigs or
fixtures. The rotating saw blade could turn
the workpiece.
When sawing thin stock layed on edge, a
suitable guide must be used for firm
support.
Any other use is not as specified. The
manufacturer is not liable for any damage
caused by unspecified use.
Alteration of the machine or use of parts
not approved by the equipment
manufacturer can cause unforeseeable
damage!
3.2 General safety information
When using this tool observe the follow-
ing safety instructions, to exclude the risk
of personal injury or material damage.
Please also observe the special safety
instructions in the respective chapters.
Were applicable, follow the legal
directives or regulations for the pre-
vention of accidents pertaining to the use
of band saws.
General hazards!
Keep your work area tidy - a messy work
area invites accidents.
Be alert. Know what you are doing. Set
out to work with reason. Do not operate
tool while under the influence of drugs,
alcohol or medication.
Consider environmental conditions: keep
work area well lighted.
Prevent adverse body positions. Ensure
firm footing and keep your balance at all
times. When working long stock use
suitable supports.