Charnwood W020, Руководство пользователя

Страница: 10 / 20

Locate the hinge pin in the underside of the
mitre fence into the hole in the runner.
Secure the mitre fence to the runner with the
handle bolt and washer.
Slide the runner into the table slot from the end.
There are adjustable preset stops for setting the
mitre fence at 90 degrees and 45 degrees left &
right
45 Degrees Right
90 Degrees
45 Degrees left
Attaching the Router to the Table
Consider removing the faceplate cover from the
router base. Doing so will increase the maximum
plunge depth by an amount equal to the
baseplate thickness.
The router table is supplied with our unique
centring jig to speed up accurate mounting of
1/2” collet routers.
Fully plunge the router and lock the 1/2”
diameter shaft of the Centring Jig into the
routers collet.
Ensure the body of the shaft projects from the
base plate by approximately 30mm.