Charnwood BD48, Руководство пользователя

Страница: 11 / 16

Maintenance
Replacing the Sanding Disc
Always ensure the machine is
disconnected from the power supply
before changing the sanding disc.
Remove the disc worktable and then
the disc cover which is secured with
six screws.
Carefully remove the existing self-
adhesive sanding disc with the aid of
a flat bladed scraper.
Remove any residue from the
sanding plate using mineral /
methylated spirit.
Peel the backing from the new
sanding disc and apply to the
sanding plate. Ensure that it is
positioned centrally on the plate, then
press firmly into place.
Re-fit the disc cover plate, tightening
all screws, re-attach the worktable.
A Velcro Conversion Backing Pad (VB300) can be attached to the plate in the same way as a
self-adhesive sanding disc. This enables Velcro backed sanding discs to be used which provide
easier changing without damage to the discs.