Charnwood 5060281690036, Руководство по эксплуатации

Страница: 8 / 16

This pointer is adjustable if the setscrew is
loosened. You may need to make a small
adjustment after the table is set
perpendicular to the blade.
If the table needs to be moved laterally to
centre the slot on the blade, loosen these
three screws, move the table to the correct
position and retighten the bolts.
Screw the four hex, wing bolts and washers
into the tapped holes on the underside of the
table and slide the rip fence carrier on to
them.
Adjust the two hex headed bolts so that the
carrier fits snugly to the table with no gap
between its upper edge and the table.
If you do not keep the carrier tight to the table
the rip fence will not be perpendicular to it.