Page 4 of 9
②
MC-7000 Series
- When power is on, the receiver conducts self-diagnosis with music is being played
and the display blinking in order.
- When a table number is input, it appears on the screen and the number goes off after
time setup.
- When several numbers are input, they appear moving from the left to the right in the
order of input.
2) Transmitter (commonly used in MC-6000 & 7000 Series)
3) Repeator (commonly used in MC-6000 & 7000 Series)
4. Installation
1) Receiver
①
Avoid humid places.
②
Install it at least 3m away from wireless devices(such as wireless phones) and the
places of big magnetism(such as speakers).
③
Check the electric power source and voltage of the place where it is installed(220V).
④
The antenna is regulated at the angle ranges of 0 °~45° and a 3-stage antenna is used.
⑤
When power is on, check the self-diagnosis(refer to 1-3).
2) Transmitter
①
Install it at least 3m away from the receiver.
②
In case batteries(A23, 12V) are exchanged, insert identical batteries after loosening
screws of the backside(pay attention to +,-).
③
Batteries should be exchanged when the blinking of the lamp on the top of the
transmitter conspicuously slows down.
