Charlton & Jenrick iRange i1000e, Руководство пользователя, Страница: 19 / 25

16
6c. APP Control
the appliance has been reset. Re-setting of the E.S. Control proceeds is as
follows:
1. Switch off the appliance (Manual switch) and leave it of for approximately
10-15 minutes.
2. Remove any obstruction to the fan heater outlet or fan blades etc. Make
sure that the power supply is disconnected with the plug socket outlet while
doing this.
3. Switch on the appliance and the E.S. Control will be re-set.
4. Ensure that the appliance is functioning correctly. If the E.S. Control
operates a, the appliance should be checgainked by a competent electrician.
Visit your APP store for IOS or Android to download the C&JsmartFIRE APP.
Or use the QR code on the next page. Follow your devices onscreen
instructions to create an account. Once installed, follow the procedure below
to pair the device with your appliance.
1. Start the APP and click “Add Device” on screen. Click “smartFIRE” ,then
select WiFi network and enter the password. Note, your device must also be
connected to the same home network what you wish to connect the appliance
to.
2. Ensure the appliance is powered on , then press and hold the Wi-Fi button
on the appliance until you hear 3 beeps at EZ mode . At the same time, the Wi-
Fi indicator and the fuel bed will blink.
3. Follow the instructions on APP to choose the EZ mode and confirm the
indicator is flashing . Click Next and start to add the device.
If failed at EZ mode, try AP mode. Please press the Wi-Fi button, you will hear
3 beeps, then keep pressing until you hear another 5 beeps to enter AP mode.
and then Follow the instructions on APP to choose the AP mode and confirm
the indicator is flashing . Click “Go to Connect” and choose a Wi-Fi called
“SmartLife-XXX” and start to add the device.
We have created a very detailed APP Operation Instruction and videos to
guide you through the process how to load down the APP, Create an account ,
Pair your appliance to your smart phone and operate the appliance. Scan the
QR code on the back of the remote to be taken to the Operation Instruction or
the video.