Charlie Lab Black Lite System MIXLITE, Руководство пользователя

Страница: 9 / 15

Functions and use:
To use mixlite in the traditional way:
1) Move the MASTER slider to its typical position (about 3/4)
2) Move the individual channel sliders until you get the desired sound level.
3) Verify that the levels shown on the leds matrix display it is neither too high nor too low.
4) Acting on the "▲ ","▼ "of the respective channel, modify the tones and / or adjust the level of the
reverb which can be edited using the Eff buttons.
Note: Pressing two adjacent buttons simultaneously for more than three seconds, the parameter
displayed will be reset to the "default" value. It is possible to recall all the MixLite's original
parameters (factory settings), by pressing Chan.Off/On of the stereo channel 6 while the equipment is
powered on.
Advanced features:
At this point if the user desires the functions that are normally only present in professional type mixers,
you can access them simply by simultaneously pressing the 2 adjacent, relative buttons to the selected
function. At each press, the display will illuminate showing the new function; it will remain active for
some seconds so that they can be edited using the same individually pressed buttons (▲ & ▼). To go
back to the normal display, just press the
EXIT key.
The automatic return to normal display is definable in the "ESC" function by pressing the keys
Display twice.
To better understand the concept, here is the list of functions and subfunctions available on each of the
4 channels:
Mic (Mic 1-Mic4).
1) Chan. Off / On -> Compressor Off / Type -> Noise Gate Off / Threshold -> Pitch Detune Off / Type
2) EQU High LEVEL -> FREQUENCY
3) EQU Midrange Hi LEVEL -> FREQUENCY -> BANDWIDTH
4) EQU Midrange Lo LEVEL -> FREQUENCY -> BANDWIDTH
5) EQU low LEVEL -> FREQUENCY -> Low Cut
6) Rev Send LEVEL -> AUX Send LEVEL
Below is a list of available functions and subfunctions
on each of the 2 Stereo Line (Stereo5-Stereo6) channels,
very similar to those of MIC 1/2/3/4
1) Chan. Off/On (*) --> Compressor Off/Type (**) --> Noise Gate Off /Threshold (**)
2) Eq High LEVEL --> FREQUENCY
3) Eq Mid LEVEL --> FREQUENCY --> BANDWIDTH
4) Eq Low LEVEL --> FREQUENCY --> Low Cut (100Hz)
5) Stereo Balance --> Chan Mode Stereo/Mono
6) Rev Send Level --> AUX Send LEVEL