manualshive.com logo in svg

Charles RT115 Tier 3, Руководство пользователя, Страница: 104 / 252

Поделиться
Скачать
Charles RT115 Tier 3 Скачать руководство пользователя страница 104

 RT115 Tier 3- PLOW ATTACHMENT

OPERATION

104

RT115 Tier 3 - PLOW ATTACHMENT

OPERATION

16. Move attachment speed/direction control to full speed 

forward. PLOW WILL VIBRATE.

17. Reduce attachment speed to a point with the least tractor 

vibration and the highest ground drive speed possible without 
tire slippage.

18. Adjust vibrator speed if ROPS vibrates excessively. 

19. When installation is complete, move plow swing to neutral.

20. With vibrator running, raise plow to ground level.

21. Move attachment speed/direction control to neutral.

22. Swivel seat to the drive position.

23. Engage parking brake and verify parking brake indicator is 

on.

24. Lower backfill blade.

25. Turn ignition switch to STOP and remove product from plow.

26. Tilt steering wheel column down, start tractor and drive a 

short distance away from work site.

27. Disengage axle lock by driving tractor in reverse 6’ (2 m).

28. Shut down tractor. See 

TRACTOR

 for proper shutdown 

procedures.

NOTICE: Do not operate vibrator when plow is out of the 
ground. This will cause excessive vibration resulting in 
rapid wear, and possible damage to the unit and product 
being installed.

16. Move attachment speed/direction control to full speed 

forward. PLOW WILL VIBRATE.

17. Reduce attachment speed to a point with the least tractor 

vibration and the highest ground drive speed possible without 
tire slippage.

18. Adjust vibrator speed if ROPS vibrates excessively. 

19. When installation is complete, move plow swing to neutral.

20. With vibrator running, raise plow to ground level.

21. Move attachment speed/direction control to neutral.

22. Swivel seat to the drive position.

23. Engage parking brake and verify parking brake indicator is 

on.

24. Lower backfill blade.

25. Turn ignition switch to STOP and remove product from plow.

26. Tilt steering wheel column down, start tractor and drive a 

short distance away from work site.

27. Disengage axle lock by driving tractor in reverse 6’ (2 m).

28. Shut down tractor. See 

TRACTOR

 for proper shutdown 

procedures.

NOTICE: Do not operate vibrator when plow is out of the 
ground. This will cause excessive vibration resulting in 
rapid wear, and possible damage to the unit and product 
being installed.

Содержание RT115 Tier 3





























































































































































































































































Отзывы:

Нет отзывов