Installation Steps
1.
Select on your chosen surface where you will position
your wireless charger (We suggest that you test that a
compatible phone can charge through the surface before
proceeding).
2.
Stick the marker sticker and place one magnet in the center.
3.
On the underside of the surface align the second
magnet with the first and place the marker template
over the magnet.
4.
Remove the magnets. Stick or Screw the mounting
bracket, using the marker template for alignment.
5.
Plug the Power adapter into the charger and click the
charger into the mounting bracket, the charger can only
fit into the bracket one way.
6.
Plug the power adapter into the mains, a red light
should indicate that the power is on.
7.
Place your compatible device onto the marker sticker,
the green light will now indicate device is charging.
qi/MagSafe
Compatible Device
Maximum Surface
Thickness 30mm
Minimum Surface
Thickness 15mm
