CHARGETRONIX HPC-160-480-1, Руководство по установке, Страница: 5 / 21

5
SAFETY INSTRUCTIONS
Read the entire installation manual instructions prior to site design and charger installation. This equipment should only be
installed by a journeyman or master level electrician. Compliance with local building codes is required. In most jurisdictions,
the installation of this equipment requires plan checks and building and electrical permits prior to construction or installation.
Verify these and other necessary requirements with the local AHJ prior to starting any construction or installation.
The charger relies on a grounding system for safety. All grounding instructions should be strictly adhered to as prescribed
in this manual, any applicable electrical safety requirements, all local electrical safety codes, and the National Electrical
Code (hereafter referred to as ‘NEC’).
HIGH VOLTAGE EQUIPMENT:
This charging system contains both AC and DC high-voltage circuitry, devices, and components. As such, this
charger equipment should only be installed by a qualified electrician trained to work on high-voltage and high-current
AC and DC systems.
ADDITIONAL CAUTIONARY NOTES
WARNING
Do not have power on while any of the maintenance doors of the charger are open unless proper personnel
protection equipment is worn. Only trained personnel should be working with this equipment while the doors are
open and/or the unit is receiving power.
WARNING
There are high voltage and high-capacity energy storage components in this system. There are components and
circuits that remain charged for some time (1 to 2 minutes) with high-voltage power, even after the main power has
been disconnected. Always test with a voltmeter before any maintenance or service is performed.
This manual offers guidance and instructions on the electrical and mechanical installation procedure(s) for the
ChargeTronix HPC-160-480 charger.