3S-16S LiPolymer battery Monitor and Saver BM16LP V2.0
www.chargery.com
page 2 total 5
Chargery Battery Saver BM16LP is for 3S ~ 16S LiPolymer battery applied to E-bike, E-scooter etc.,
High light red LED and loud beepers (85Db) make sure battery operation safety. The unit is with TFT
color LCD display battery voltage, cell voltage, 2 battery temperature, and battery SOC (State of
Charge). You can setup over discharge warning cell voltage,
over charge warning voltage
, the
highest battery temperature and the lowest battery gauge for warning.
During battery discharge, if any cell voltage under setup value, or battery temperature over setup or
battery gauge under setup, the BM16LP can sound and LED flash alternately prevent any cell from
over discharged.
During battery charge, if any cell voltage over setup value, or battery temperature over setup, the
BM16LF can sound and LED flash alternately prevent any cell from over charged.
When you stop driving your bike or scooter, you can check the lowest cell voltage, so you can find the
worst cell---the lowest voltage cell.
New features
BM16LP can indicate battery SOC or called battery gauge similar with car dashboard. Cell count,
battery pack voltage and battery gauge (%) is displayed simultaneously.
BM16LP will record the lowest voltage of each cell during discharge, after you stop driving your
bike, scooter etc., you can press UP or DOWN button to display these voltages (
cell number
background color is green, and the lowest cell voltage displayed in
RED
text
), press the
button again display real voltage.
Beeper sound and LED flash alarm alternately while any cell over charged or over discharged.
Two temperature sensors monitor battery temperature during charge or discharge.
At any time, you can press SET button shortly turn off the display and press again resume.
While alarming, press SET button shortly turn off alarm.
Operating guideline
1.
Connect the battery to BM16LP, keep the polarity correct. The detailed connection diagram is as
the following figure 1 and figure 2.
2.
The unit will initialize the beeper and LED, beeper sounds once time, warning LED flash once time.
3.
2 seconds later, the BM16LP will display battery SOC (State Of Charge) as same as car dashboard.,
two battery temperatures, cell count, battery pack voltage, and battery gauge in digital
Socket 1
Socket 2
Cell 1-
Cell 2-
Cell 3-
Cell 4-
Cell 5-
Cell 6-
Cell 7-
Cell 8-
Cell 8+
Cell 9-
Cell 10-
Cell 11-
Cell 12-
Cell 13-
Cell 14-
Cell 15-
Cell 16-
Cell 16+
SET
DOWN UP
LED
BEEPER
Temperature sensor
Temperature sensor
