RAY
ENG
User Guide
1.
Connect RAY to an outlet socket. Make sure to always do this step
first.
2.
RAY will start and indicate the selected charging current on the display.
3.
Make sure the RAY cable is not creating a coil.
4.
Select the desired charging current by maneuvering the touch sensors.
Press settings (gear-wheel) and then adjust current with the up/down
arrows on the screen and end with OK (green check).
5.
Insert the RAY into the EV. Charging starts automatically. The display will
begin to show a charging graphic.
To start charging
READ SAFETY PRECAUTIONS BEFORE USE
To stop charging
1.
Unlock your car.
2.
Remove RAY from your car
3.
Remove the socket plug from the outlet.
To prevent arching and wear on plugs and outlet, the order of removal is
important. The following procedure minimizes the risk of arching.
Charging Current
You should always have good knowledge about the electrical installation
before you start charging to make sure the installation handles the load
correctly.
Charging with high current requires that the outlet is rated for the load
continuously and that the cable dimensions between the electric central and
the outlet are of adequate size. You should also make sure that the installation
and outlet are in good shape and can handle the continuous load.
If you are uncertain about the quality or capacity of the electrical installation
consult your certified electrician.
See safety precautions for more information
Содержание RAY 1P 16A T1
Страница 1: ...RAY Product Manual Produktmanual...
