!
!
OPERATION
READ SAFETY PRECAUTIONS BEFORE USE
!
CAUTION
- Instructions pertaining to a risk of fire or electric shock.
Save these important safety instructions.
WARNING
– This manual contains important instructions for the BEAM electric vehicle charger
that must be followed during operation, and maintenance of the unit. When using electric prod-
ucts, basic precautions should always be followed, including the following instructions.
WARNING
-
Do not use BEAM for any other purpose than to charge
an electric vehicle.
DISCLAIMER:
Charge Amps AB is not responsible for damages, either direct or indirect, relating to the use of these instructions.
Charge Amps AB cannot guarantee completeness, accuracy or timeliness of the information found in this manual, and we reserve the right to make changes at any
time without notice.
TO START CHARGING
1.
Connect BEAM to a Type 2 outlet on a charging station.
2.
Make sure the BEAM cable is fully uncoiled.
3.
Insert the BEAM into the EV.
STORAGE
1.
For long-term storage, keep the BEAM in a dark and dry place.
2.
After receiving the BEAM, carefully inspect for damages
before first use.
GENERAL INSTRUCTIONS
1.
Read all the instructions before using BEAM.
2.
Children should not be left unsupervised while device is in use.
3.
Do not put fingers into the connectors.
4.
Do not immerse the BEAM in water or other fluids
EN
Содержание BEAM 1P 20A T1
Страница 1: ...BEAM Product Manual Produktmanual...
