Charder P510, Руководство пользователя, Страница: 5 / 12

P510 Series
4 CD-IN-XXXXX REV001 2020/04
7. : Price Look Up for PLU 15-99
8. : Program Price Look Up for PLU 1-99
9. : Price Look up for PLU 1-14
10. : Numeric keys 0-9
Operation
Power On
The power switch is located on the bottom right-side panel towards the front of the device. After device is switched on,
it will perform a brief display test. After test completion, software version will be displayed, followed by weight display
showing zero weight, indicating device is now ready for use.
Before using the device, it should be "warmed up" (switched on and unloaded for about 15-20 minutes)
Weight Measurement
Displaying Weight
1. With device in weigh mode, "0.000" will be displayed on the weight indicator, and "0.00" will be displayed on the
UNIT PRICE and TOTAL PRICE indicators.
2. Place item to be weighed upon the measurement platform.
3. WEIGHT display will show weight of item on measurement platform.
Note : UNIT PRICE and TOTAL PRICE will remain at "0.00"
Zero Weight Display
1. Press the ZERO key.
2. Weight display will return to zero. The ZERO symbol will be marked on the display.
Tare
1. Place empty container on measurement platform.
2. Press
TARE key.
3. WEIGHT display will change to zero, and the NET WEIGHT symbol will be marked on the display.
4. Key in unit price using keypad.
5. Place item in container. Net weight of item will be displayed.
6. Read net item weight and total price.
7. If label printer is connected to device, press
PRINT key to print a label.
8. Remove container and item from measurement platform.
9. Device will return to zero, and clear tare and unit price information.
10. Device is ready for next operation.