9
ERROR MESSAGE
3. UNDER ZERO
If zero count is below the setting range, the
display will show “Errl” message. The scale
will turn off in 30 seconds if the status
continues.
4. OVERLOAD
If the total load exceeds the maximum capacity
of the scale, the display will show “Err”
message. The weight must be removed
immediately from the surface.
2. OVER ZERO
If zero count is higher than the setting range,
the display will show “Err” message. The scale
will turn off in 30 seconds if the status
continuous.
1. LOW BATTERY
If battery is discharged, the display will show
LOW. The operator should replace the
battery.
2
PREFACE
Thank you for choosing CHARDER MEDICAL product. All features of this
product were designed to state of the art and are optimized for simple and
straightforward use. If you have any queries or experience any problems
not addressed in the operating instructions, please contact your
CHARDER MEDICAL service partner, or visit us on the Internet at
www.chardermedical.com
GENERAL INFORMATION
We strongly recommend you use the scales on flat and hard surface. Any
soft surface, like carpet will cause inaccuracy.
SAFETY INSTRUCTION
Before putting the device into use, please read with care the
information given in the Operating Instructions. They contain important
instructions for installation, proper use and maintenance of the device.
The manufacturer shall not be liable for damages arising out of failure to
heed the following instructions:
When using electrical components under increased safety requirements,
always comply with the appropriate regulations.
Improper installation will render the warranty null and void.
Ensure the voltage marked on the power supply unit matches your mains
power supply.
This device is designed for use indoors.
Observe the permissible ambient temperatures for use
The device meets the requirements for electromagnetic compatibility. Do
not exceed the maximum values specified in the applicable standards.
If you have any problem, contact your local CHARDER MEDICAL service
partner.
