Char-Broil TRU Infrared Patio Bistro 12601713, Инструкция по сборке

Страница: 10 / 12

4
10
GRILL FINAL Assembly
Part Qty .
E2 – 1
E3 –
Cooking Grate
1
E2
E3
E1
– 1
E1
E4
.
E4 – 1
Handle
Fasteners
(Qty 2)
Fiber Washer
10-24x3/8"
(Qty 2)
screw
E
Fiber washers
10-24x3/8” screws
Step 2 - With Grill Lid open, install the Handle (E4) to the lid. Insert fiber washer over 10-24x3/8”
screw from inside the lid through the lid holes, and into the handle. Repeat for other side - tighten
securely.
Step 1 - With Grill Lid open, screw Flame Tamer (E1) to burner. The place the Cooking Grate (E2)
into the Lower Body , allowing it to rest on the three brackets spaced around the Lower Body . The
cooking grate ridges should run from front to back of the grill as shown below. Place the Warming
Rack (E3) on to position by first hooking the center pin into the hole in the wind shield, then rotate the
warming rack down into position, with other pins secured in the slots.