7
3
Items to Assemble
3 Lid Hangers
3 Self-tap Screws
A)
Place lid hanger bracket on upper lip of insulation bowl.
Note:
Adjust insulation bowl as necessary to align.
B)
Secure lid hanger brackets with (1) #12x1/2” self-tap screw for each hanger.
C)
Tighten wing nut from Step 2.
#12-1/2”
Self-tap Screw
Qty: 3
Repeat for all three holes
Lower end of lid hanger
bracket must rest on upper
lip of insulation bowl.
A
4
Items to Assemble
1 Grill Bottom
1 Bottom Insulation Bowl
A)
Fold flaps
inwards and upwards
(90 degrees) so they are horizontal.
B)
Align rectangular slots.
C)
Push insulation bowl tabs down and under to temporarily hold bowl in place while you work.
B
A
C
Grill Bottom
Bottom Insulation Bowl
May be factory assembled.
B
