8
4644450-04
For your safety
Leak test must be repeated each time fuel bottle is exchanged or refilled.
Do not smoke during leak test.
Do not use an open flame to check for gas leaks.
Barbecue must be leak checked outdoors in well-ventilated area, away
from ignition sources such as gas fired or active electrical appliances.
During leak test, keep Barbecue away from open flames or sparks.
Never remove injector at end of valve (A).
Assembly - Leak Test
To leak test your Barbecue:
1. Turn control knob to OFF
2.
Be sure regulator is tightly connected to fuel bottle.
3
. Turn gas on at the tank by using the regulator.
4.
Brush soapy solution onto following connections:
Regulator fitting, face at crimps and vent hole
(2);
Hose (3) and all connections;
All fuel bottle welds
(fuel bottle collar, middle and bottom) (4).
5. "If growing"
bubbles appear, there is a leak. Close fuel bottle
valve immediately. Retighten connections and repeat leak test
procedures. If leaks cannot be stopped replace parts.
Use a clean paint brush and 50/50 soap and water
solution.
Use mild soap and water.
s
Do not use
household cleaning agents.
Damage to gas train
components can result.
If "growing" bubbles appear do not use or move the fuel
bottle. Contact gas supplier.
A
1
3
2
3
4
Do not use Barbecue until leak checked.
If leak is detected at any time, STOP.
Immediately
close fuel
bottle valve, stay away from the Barbecue and call local gas
supplier.
Postion tank to side of barbecue on level surface.
All manuals and user guides at all-guides.com
