Char-Broil 7301411, Руководство по эксплуатации продукта, Страница: 9 / 16

3
4
STAND UNIT UP
• Hook the back side of wood rack into two attached legs as shown (A).
• Attach (1) short leg and (1) long leg to front of bottom assembly by first hooking legs onto wood
rack, then position legs so that they are aligned with holes in bottom.
This may require at least two people
• Attach using (4) 1/4-20x1/2” hex screws from outside and flange nuts on inside.
A
• Insert a cotter pin through the hole in one end of the axle and bend it so it won’t back out (A).
Axle
Cotter pin
A
Cotter Pin
Axle
9
Slide a wheel onto the axle. Slide axle through hole in bottom of short leg as shown. Slide the
other wheel onto the end of the axle. Insert the remaining cotter pin through the hole in the
axle. Make sure all hardware is tight.