ON
OFF
Tap lever
Pump
lever
1
2
3
4
5
6
4989940 • 9
USE AND CARE
Pump Connection
Your bar kit is equipped with a Sankey style pump which will fit most American kegs
.
Make sure tap lever is in the OFF position.
Insert pump into keg and twist pump clockwise until it stops.
Pull pump lever out and push downward until locked in position.
Pull the tap lever to the ON position.
If no liquid flows from tap, turn tap lever off and pump the keg to increase pressure.
Repeat steps 5 and 6 until liquid flows freely from tap.
(keg not included)
1.
2. IMPORTANT: Before connecting pump to keg, pull the pump lever out and then upward.
3.
4.
5.
6.
Troubleshooting
Problem
Liquid shoots from keg
when attaching pump.
Liquid does not flow
from tap.
Possible Cause
• Pump lever locked in down position.
• Tap lever is in OFF position.
• Not enough pressure from keg.
• Keg is empty.
Prevention/Solution
• Pull pump lever out and then upward before attaching to keg.
• Move tap lever to ON position.
• Pump keg several times to increase pressure.
• Replace with full keg.
