On back of grill, place upper back panel between side panels and
above lower back panel. Secure upper back panel, in lower holes,
using one
1/4-20x1½”
screw,
7mm
lock washer, and
7mm
flat
washer on each side.
Do not fully tighten screws until side shelf
installation is complete in later steps.
5
15
1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
Upper back panel
6
Fascia, right side shelf
Bracket
Insert flange on right side shelf into side shelf brackets on side of firebox.
Attach rear of shelf using one
1/4-20x1½”
screw,
7mm
lock washer, and
7mm
Attach right side shelf using three
1/4”-20x3/4”
screws,
7mm
lock washers,
7mm
flat washers,
1/4”
nuts, shown
A.
flat washer in lower hole, shown
B.
flat washer, shown
C.
Attach front of shelf and fascia using one
#8x3/8”
self-tapping screw and large
Attach front of shelf and fascia using one
1/4”-20x3/4”
screw,
7
mm lock washer,
7
mm flat washer and
1/4”
nut, shown
D/C
.
1/4-20x3/4”
screw
#8x3/8” self-tapping
Large flat
washer
1/4”nut
1/4”nut
washer
7mm flat
washer
7mm flat washer
A
C
screw
7mm lock
washer
7mm flat
washer
B
1/4-20x1½”
screw
Flange into bracket
D
Back of main control panel
1/4-20x3/4”
Igniter Switch
screw
Main control
panel
7mm lock
washer
7mm lock
