Tank screw
17
18
LP tank is sold separately.
Fill and leak check the tank (see Use &
Care section) before attaching to grill and regulator .
NOTE: Door not
shown for clarity.
22 • 463422107
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+
) facing outward. Screw ignitor cap onto ignitor .
+
–
AA Battery
Tank valve must face to front of cart once tank is attached.
Failure to install tank correctly may allow gas hose to be
damaged in operation, resulting in the risk of fire.
CAUTION
LP Cylinder
(not included)
Once tank has been filled and leak checked, place tank into tank hole in bottom shelf. Make sure tank valve is facing
front of grill. Put regulator assembly through circular opening of cart side panel. Connect regulator to tank valve securely.
Secure tank with tank screw at rear of bottom shelf. Ensure Over Pressure Device(OPD) of tank valve face to front door.
See Use & Care manual to perform the “Burner Flame
Check” and for important safety instructions before using.
