6
On back of grill, place upper back panel between side panels
and above lower back panel. Secure upper back panel, in
lower holes, using one
1/4-20x1½”
screw,
7mm
lock washer,
and
7mm
flat washer on each side.
Do not fully tighten
screws until side shelf installation is complete in later
steps.
5
1/4-20x1½” screw
7mm lock
washer
7mm flat
washer
Front brace
1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
Rear upper panel
16 • 463260108
Insert front brace under control panel and between cart side panels.
Secure using two
1/4-20x1½”
screws,
7mm
lock washers, and
7mm
flat washers on each side.
NOTE: Do not fully tighten screws as some adjustments may
need to be made when installing Doors on step 14.
Door Pin in
downward
position
