•
Place heat tents over tube burners by inserting tabs into slots in front of firebox. Opposite ends of heat tents rest on pins in back of
firebox.
NOTE:
There is no heat tent over sear burner.
11
Heat
Tent
Back of Firebox
Pin
Heat
Tent
Front of Firebox
12
•
Place cooking grates onto grate rests.
•
Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming Rack leg wire into holes in sides of
firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top,
Warming Rack is installed upside-down.
•
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
Cooking Grate
Sear Burner
24
AA Battery
+
–