Char-Broil 12601711, Инструкция по сборке

Страница: 5 / 8

Step 3 -
Attach Wind Shied (B2) inside the Lower Body (B1) by aligning the holes in the
Wind Shield with corresponding holes in the Lower Body . Place fiber washer over 10-24x3/8”
screw and then insert screw with washer through hole in the center of the back and secure
with 10-24 nut. Repeat for other 2 holes.
Step 4 -
Attach the Grill Lid (B3) by aligning the hinge holes in the Grill Lid over the hinge pin in
the Wind Shield (B2). Insert fiber washer over 1/4-20x1” screw then insert screw through hinge pin
hole and secure using 1/4-20 nut from the inside of the grill. Repeat for other side.
5
ASSEMBLY GUIDE
(qty 5)
Fiber Washer
(qty 3)
Fasteners
10-24x3/8"
(qty 3)
screw
10-24 Nut
(qty 2)
(qty 2)
1/4-20 Nut
screw
1/4-20x1"
GRILL BODY Assembly
Part Qty
B1
– Lower Body 1
B2
– Wind Shield 1
B3
– Grill Lid 1
10-24x3/8"
Screws
(3 each)
Screws
(2 each)
1/4-20x1"
1/4-20
Nuts
(2 each)
Fiber
Washer
(2 each)
B3
B2
B1
B2
Fiber
Washer
(3 each)
10-24
Nuts
(3 each)