3
Lower bowl onto assembled base
Completed view of Caldera Fire Bowl After
Assembly
Assembly of Ash Catcher
Using (3) 10-24 Combo Truss Head Machine Screws from inside
the bowl and (3)10-24 Keps Lock Nuts, attach ash catcher to the
bottom side of bowl. Tighten all nuts when ash catcher bracket is
attached to bowl.
Limited Warranty
The manufacturer warrants the Fire Bowl for replacement or repair of parts and/or workmanship for a period of ninety (90) days.
Paint is not warranted and will require touch-up.
These limited warranties are made exclusively to the original customer presenting proof of purchase. These warranties are limited to
non-commercial residential use only. Any returned goods must be shipped prepaid. These warranties do not cover normal wear and
tear or damages resulting from abuse or misuse. This warranty excludes incidental or consequential cost due to damages or losses
or property of any nature.
NOTICE: Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an
implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and
you may also have other legal rights which may vary from state to state.
For warranty service, CALL TOLL FREE:
1-800-232-3398.
HARDWARE
Hardware is shown actual size. You may have spare hardware after assembly is complete.
#10-24x3/8”
Combo Truss Head
Machine Screw
Qty: 3
1/4-20x1/2”
Carriage Bolt
Qty: 8
1/4-20
Keps Lock Nut
Qty: 8
#10-24
Keps Lock Nut
Qty: 3