STEP 3.
Set the top cap assembly down onto the side
panels. Make sure the side panels are on the outside of
the top cap mounting flange. Attach top cap using 2
#10-24 x 1/2” Combo truss head screw per side and 2
#10-24 KEPS nuts. Attach screws from outside of
fireplace (as shown). Tighten all screws and nuts.
STEP 4.
Insert remaining two side panels into slots (as
shown). Your Outdoor fireplace is now ready for use.
STEP 1.
With the aid of a helper, stand firebox on
its side and attach legs (as shown) using 2 #10-24 x
1/2” Combo truss head screws from the inside of
firebox and 2 #10-24 KEPS nuts. After all legs are
attached and tight, set fireplace upright on legs to
complete remaining steps.
STEP 2.
Attach 1 side panel to each short end of
firebox using 3 #10-24 x 1/2” Combo truss head screws
from the outside of firebox and attach 3 #10-24 KEPS
nuts to screws from the inside. Tighten all screws and
nuts.
