Description
Channel Vision’s 8dB power injected amplifier increases the strength of the
incoming cable or antenna signal. The increased signal strength means that
you can distribute the television signal longer distances and to more outputs.
Unlike most RF amplifiers, the C-0314 uses an external power supply that
can be connected directly to the unit using a coax “F” connector. For added
versatility the power injection feature was removed so we could pass IR.
Instructions
Step 1:
Snap the C-0314 into C-0112,C-0119,C-0138,C-0150 chassis of your
choice.
Step 2:
Connect the incoming cable or antenna line to the INPUT port.
Step 3:
Connect the outgoing coax cable to the OUTPUT port to distribute the signal
to 4 TV locations or a passive splitter.
Step 4:
Connect the power transformer to the DC12V INPUT.
Please Note
:
The unused trunk line connector or unused output of the last outlet device in each
trunk line MUST BE TERMINATED using a 75
Ω
terminator
(model 2101).
Standard Wiring Layout
Cable or
Antenna
output
CHANNEL VISION
Central
Central
C-0314
Warning
To prevent fire or shock hazard, do not
expose this appliance to rain or moisture
Specifications
Bandwidth
45-1000Mhz
Gain
8dB +/-1.5
Flatness
+/-1dB
Return Loss (min)
14dB
Return
5-42Mhz
Dist. X-Mod.
-70dB
CTB
-65dB
Power Supply
12V/55mA
