Channel Vision Aria A0351, Инструкция по эксплуатации

Страница: 6 / 12

Using the A0351 Behind a TV or as a Stand Alone System
The A0351 can be mounted behind a wall-mounted TV to power in-wall speakers.
By connecting the audio outputs from the TV to the Optical inputs of the A0351,
the TV’s audio signal will be amplified to the in-wall speakers. If the TV has
variable audio outputs, the sound level will simply be controlled by the TV’s
volume buttons. If the TV only offers a fixed audio output, A0351 volume level can
be adjusted by connecting any of the following: A0129/ A0127/IR-2400 ir keypads
and using a compatible remote such as model A0505. The sub-woofer output on
A0351 can be connected to a powered sub-woofer to add more bass to your
audio system.
Behind the TV
Variable
Optical input
from the TV
The TV volume control determines
the volume of the speakers
The TV volume control will determine
the volume of the powered subwoofer.
Front Left
Front Right
Powered
Subwoofer
A0127
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
1
2
3 4
5
6
7
8
9
0
Power
Integrated IR repeating
allows TV remote to
control TV from here
Power supply
A0351
*When all switches are in UP position the Source selection is controlled
using IR Remote A0505 or A0127 Keypad.
Source selection using Channel Vision IR Remote/keypad is as shown
below:
1–Optical Audio Selected
2–Analog Audio Selected
3–CAT5 Audio Selected
Note: Volume Control using IR Keypad/Remote works at any setting of these
switches.
Priority Switch Settings:
The Channel Vision Amplifier has 3 switches to set the priority of audio
sources. D
efault position of these switches will be all DOWN.
*User may change switch setting and customize priority of sources as per
the table shown below:
Switch #1 Switch #2 Switch #3 Priority for auto-selecting sources
DOWN DOWN DOWN Optical, RCA/CAT5
DOWN DOWN UP IR Learning
DOWN UP UP Optical, RCA/CAT5(individual volume)**
UP UP UP IR selects source*
**individual volume indicates each source can be set to a specific volume
and will hold on to the set volume level unless changed by the user when
playing that source.
When power is turned ON in this setting, each source starts at 25% and can
be set to any volume without changing the volume on other sources.