background image

Channel Injector wire connection:

At the channel injector, connect Cat 5 wire as shown. Follow the
color coding on the screw terminal.

Applying Power and Programming
Step Three

The 9500 series has three different methods for applying power 
to the system. 

Use only one method for applying power.

Method One:

Apply power directly to the 

channel injector with the power supply. 

The green LED in the upper right corner of the injector will be lit
showing power is active. 

(See power length requirements page 9)

5

How to Program

Determine which unused channel you want to view your video
source on and program the injector for that channel. There must be
one unused channel both before and after the selected channel to
avoid interference. The new channel will be combined with the exist-
ing channels and appear on all televisions.

To program:

For example channel 60

1: Press the button 6 times.

2: Wait for the LED to relight.

3: Press the button 10 more times 

(pressing 10 times enters “0”).

The injector will now combine the camera feed on channel 60 with all other

existing channels from the incoming CATV or antenna.

To program a three digit channel: 

For example channel 120

1: Press the button 1 time.

2: Wait for the LED to relight.

3: Press the button 2 more times.

4: Wait for the LED to relight.

5: Press the button 10 more times.

Finding Unused Channels
CATV: 

Determine the highest channel number delivering a picture,

excluding 95-99. Tune the TV up one channel at a time from the last
channel with a picture until finding one channel with no trace of a
picture or interference, just snow.

Antenna: 

Tune the TV one channel at a time from channel 14-64.

Locate one channel that has no trace of a picture or interference,
just snow.

8

blue/white

pin 1

When using only quad wire 

use positions 1, 2, 5 and 6 

and follow color coding.

© 1999

run the Cat 5 wire

through the grommet at the

bottom of the injector

green

pin 1

Power plug

Lower right of

channel injector

© 1999

power supply

green LED

programming button

Upper right corner on 

channel injector

© 1999

Отзывы: