Channel Enterprises (H.K.) Ltd.
UA-07 TouchSense Bluetooth Headset User Manual
3
B. With two mobile phones (Multi-point)
Retractable Bluetooth headset supports a Multipoint function that allows
simultaneous pairing with two phones.
1. Pair with the first phone (according to the pairing procedure part A).
2. Turn off the headset and the first paired phone is then disconnected
automatically.
3. Pair with the second phone (according to the pairing procedure part A). The
LED flashes blue once the second phone is paired.
4. Again, for some phones, you may need to manual press “connect” to
connect the headset.
5. Go back to reconnect the first paired phone manually, press “connect” in
the phone Bluetooth menu.
Reconnecting Your Headset:
1. If the headset has powered off, press the MFB once to reconnect manually
with the phone after switching on the headset.
2. If the phone has powered off and headset is then disconnected, the
headset will reconnect automatically when phone turns on again within 5
minutes. Otherwise, the headset will switch off.
Headset Features:
All features below are applicable to mobile phones with Bluetooth Hands-free
profiles.
Reset / Remove the pairing history
The headset must be plugged to the power source. Press and hold the MFB
until the red LED flashes once, then release it.
No network covered
If the service provider network is not available, headset will beep every 20
seconds.
Out of range alert
When the distance of the headset and mobile phone is nearly out of range, you
will hear a beep from the earphone. The headset will automatically reconnect
